Page 18 - Grindaix-product-catalogue-english
P. 18

GRINDAIX NOZZLES                                                                                                                                                                                                GRINDAIX NOZZLES
          GRINDAIX NOZZLES




          DUAL NOZZLE TECHNOLOGY













                           With our special Grindaix dual nozzles, it is possible to clean the machining zone efficiently, while at
                           the same time ensuring sufficient lubricoolant supply to the grinding process in order to effectively
                           cool the machining zone.

                           Just in front of the machining site, clogging on the surface of the grinding wheel is eliminated and
                           the free pores are filled with lubricoolant. The dual nozzles are suitable for use with both oil and
                           emulsion. The nozzle profile can be supplied for all worm wheel and gearwheel geometries.

                           This dual nozzle can be used during various grinding processes, such as surface, profile and gen-
                           erating grinding. Thanks to the rotary motion of the cylindrical worm, the lubricoolant is then guided
                           into the machining zone. The combination of cleaning and cooling has several advantages for the
                           grinding process:

                           - Unwanted foreign particles are rinsed away at high pressure in front of the machining site.
                           - Free pores are filled with fresh lubricoolant.
                           - More lubricoolant enters the machining zone (better cooling results).

                           The Grindaix dual nozzles are equipped with needle nozzles and special cleaning nozzles. By means
                           of the needle nozzles, the lubricoolant enters the machining zone in a targeted way and with a high
                           exit speed (dependent on the grinding process). The cleaning nozzles are optimally aligned to the
                           grinding wheel, thoroughly rinsing away impurities from the workpiece and/or grinding wheel. The
                           dual nozzles may be aligned with the aid of the Coolant Pointer. This is positioned on the provided
                           holders and allows very precise setting of the needle nozzles. Precise alignment is important, so that
                           the lubricoolant jet enters the machining zone and does not end up in the lubricoolant cycle in an
                           unused state.






                                  ADVANTAGES



                                 Cooling and cleaning at the same time

                                 Only one nozzle necessary

                                 Only one lubricoolant supply line necessary




















          18                                                                                                                                                                                                                         19
   13   14   15   16   17   18   19   20   21   22   23