Page 32 - Grindaix-product-catalogue-english

GRINDAIX NOZZLES GRINDAIX NOZZLES
GRINDAIX NOZZLES FIXED POSITIONING

EXTINGUISHING This Grindaix nozzle is assembled directly below the machining site. The lu-

bricoolant exits the nozzle via a small slot and extinguishes the sparks shortly
after they are generated. In this way, the dust and dirt particles which form are
immediately bound with lubricoolant and guided to the lubricoolant filtration
system. Dust pollution in the air is reduced considerably and the cleanliness
of the machine tool is also improved. Due to the targeted use of lubricoolant
for extinguishing the sparks, the lubricoolant requirement is very low. The
nozzles are available in all geometries, even as a 3D-printed titanium nozzle.

Heavy spark formation often occurs during grinding processes. A spark is a red-hot material particle ADVANTAGES
which has taken up so much energy in the form of heat during machining that it begins to glow. Even
sufficient cooling of the grinding zone is often not enough to prevent spark formation.
Avoids flying sparks behind Low lubricoolant consumption
the machining site
NO MORE FLYING SPARKS Easy assembly Available in every width!

Low space requirement

If heavy spark formation occurs in your machine tool, we recommend the use of Grindaix
extinguishing nozzles. These extinguish sparks reliably and also have a cooling effect on the part
and the grinding wheel. By using an extinguishing nozzle, the material particles are bound in the
lubricoolant. This is beneficial for several reasons.

Which pressure, which spray direction and which type of spray jet may be used to extinguish flying
sparks in the most efficient way? We have the answers.

We can produce a suitable extinguishing nozzle for your machine tool, customised to your grinding
wheel and machine geometry in the form of a slotted nozzle. Grindaix extinguishing nozzles achieve
the desired extinguishing effect even with low volumes of lubricoolant thanks to accurate orientation FREELY POSITIONABLE
onto the spark jet. Upon request, we can equip your extinguishing nozzle with a coating to protect it
from the highly abrasive effect of the spark jet and thus to increase its service life.
For wear-intensive machining applications, we have developed a particu-
larly robust construction for our extinguishing nozzles. Thanks to the solid
and wear-resistant design, we can achieve a very high resistance to me-
ADVANTAGES chanical damage, e.g. from impacts, as well as to wear caused by the spark
jet. These extinguishing nozzles also fulfil their task reliably, without con-
suming excessive lubricoolant. In order to guarantee a long service life, the
Avoid spark formation nozzle exit is designed to be exchangeable, so that this nozzle component
can be replaced cost-effectively when the wear limit is reached. Our ex-
Bind dust and other dirt particles tinguishing nozzles are available in various supply widths and connection
types for your machining task.
Reduce dirt on the machine

Extend the service life of the machine tool
ADVANTAGES

Low lubricoolant consumption Flexible positioning via the
articulated metal tube system,
Avoids flying sparks behind gFlex
the machining site
Available in various designs
Easy assembly
Available in every width!
Low space requirement

32 33