Page 67 - Grindaix-product-catalogue-english

MEASUREMENT AND CONTROL SYSTEMS MEASUREMENT AND CONTROL SYSTEMS

COOLANT POINTER COOLANT DISPLAY

Our Coolant Pointer allows you to see directly whether your Grindaix needle nozzle is correctly positioned. Two laser diodes show you Our Coolant Display is operated with a pressure sensor at the nozzle. By means of the integrated Grindaix lubricoolant characteristic
whether the angle of inclination and the spraying direction are correct. When operating the nozzles, it is often almost impossible to check curve, the interaction of pressure, lubricoolant exit speed and the current lubricoolant flow rate can be displayed in real time based on
whether the nozzle setting is correct due to the high lubricoolant spray effects. There is now a simple solution to this! the knowledge of the exact nozzle characteristic curve. Following successful installation of the Grindaix pressure sensor, a cable is routed
out of the machine, the machine is started and the lubricoolant data is read – DONE!

“We can make your “Simply read off your

lubricoolant supply visible.” lubricoolant exit speed.”

Faulty alignment

ADVANTAGES

Display of lubricoolant pressure, volume flow
and exit speed

Recognises the Grindaix nozzle and its specific
characteristic curve (p, Q, > lubricoolant exit speed)

Easy assembly
Correct alignment
Very easy handling (plug & play)

Can be used on all grinding machines
Upload of characteristic curves via USB interface,
dataset sent by email

ADVANTAGES SPECIFICATIONS SPECIFICATIONS

WxHxD: 153 x 130 x 37 mm
Visualises lubricoolant impact point by means of a WxHxD: 125 x 133 x 40 mm
laser beam
Housing: die-cast aluminium
Housing: die-cast aluminium, incl. magnetic base for
Displays lubricoolant impact point on your tool/part
quick mounting
Power supply: 24 V DC, 6 W
Checks the correct nozzle position (angle, distance, Protection class: IP44 (splash-proof), class 2 laser, power
supply point) below 1 mW, EN 60825-1:2007 Pressure sensor input: [0 (4) - 20] mA
Checks the position of profiled Grindaix nozzles Power supply: 3x AA batteries (Mignon)
through the simultaneous use of 2 Grindaix laser units Sensor connection: via supplied cable (push/pull) M12
on one nozzle Laser connection: ODU mini snap (cable included,
Simple handling: attach to the needle nozzle, switch length 1.5 m), up to two lasers can be connected Pressure range: selectable according
to DIN, e.g. [0 - 10] bar
on – READY!
Available for all nozzle geometries (needle diameter: 3, Grindaix nozzle data exchange: via USB interface
4 or 5 mm)
Display: resistive 3.5” touch panel, full colour

Protection class: IP44

66 67